Povar
Full Member
Posts: 112
|
Post by Povar on Feb 19, 2011 7:28:09 GMT
Hello everyone! I started to make new model of Ferrari F1. It's a 94-season's car.    But I need some HELP! I need very much photos or schems of this car's diffuser and deck.    This is early modification - without plank |
|
|
|
Post by robert on Feb 19, 2011 17:00:47 GMT
I think you know, but just info: the plank came from 1994 German GP while the stepped bottom was introduced in 1995 season. In rest of 1994 races there was a plank but the rest of the floor was flat.
|
|
Povar
Full Member
Posts: 112
|
Post by Povar on Feb 20, 2011 8:51:38 GMT
Thank's, Robert, for your information!
But, maybe, you can explain to me what the stuff is shown on this three photos of metal-plastic models(between two main spoilers of diffuser)? Unfortunately, but I can't find any photos of real 412T1(early) diffuser...
|
|
tomi
Junior Member
Posts: 67
|
Post by tomi on Feb 20, 2011 10:09:02 GMT
Hi. I found this picture. This is japanise model kit, scale is 1/20, maker is WAVE.  And I found the blog who build this kit. twbj.seesaa.net/article/151160764.html#moreThis is not a parfect one. But I hope this will help you. |
|
Povar
Full Member
Posts: 112
|
Post by Povar on Feb 20, 2011 11:04:12 GMT
Oh! Thank you, Tomi! You helped me very much!
おかげで
|
|
|
|
Post by mickeyfff on Feb 20, 2011 13:59:22 GMT
is this model going to be available to buy, if so where could i find it? could someone point me in the right direction please!!
|
|
|
|
Post by robert on Feb 20, 2011 19:18:38 GMT
|
|
Povar
Full Member
Posts: 112
|
Post by Povar on Feb 22, 2011 19:24:49 GMT
|
|
Povar
Full Member
Posts: 112
|
Post by Povar on Mar 7, 2011 22:57:11 GMT
|
|
Povar
Full Member
Posts: 112
|
Post by Povar on Mar 28, 2011 19:08:43 GMT
I spend many hours to understand this car's bodywork shape and to make it's 3D model. That's my first results:    It will be in paper soon  |
|
Povar
Full Member
Posts: 112
|
Post by Povar on Mar 29, 2011 17:39:02 GMT
|
|
|
|
Post by twcy on Mar 30, 2011 1:03:46 GMT
Looks so good!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2011 6:50:26 GMT
Povar!
It looks nice, you are on a good way. I just recommend to make the 3d model a little bit clearer. The so many little faces will be a problem when you unfold the model. As I see it will be a very pritty model. Good work.
|
|
|
|
Post by Ponytail on Mar 30, 2011 19:29:12 GMT
Special attention should go to the sidepod-inlets. They are so remarkable for this car, almost alike the Sharknose-Ferrari.
Which makes me think: why nobody ever designed this car as a papermodel?
|
|
Povar
Full Member
Posts: 112
|
Post by Povar on Mar 31, 2011 17:23:48 GMT
Thank you, friends!  to mariscal: Now I'm working on it. I want to minimize number of the parts as much as it will be possible without detriment to bodyshape. Which makes me think: why nobody ever designed this car as a papermodel? I'll be the pioneer! |
|
