Let's create the Formula 1 2014 together

[keroliver]

Hi

In the brawngpmodeling.proboards.com/
We have started a work group to create these Formula 1 2014 in paper.
Welcome to join, help, design, texture and/or test the models.

I copy and paste the previous messages:

.../...

20140316

Hi
I am ready to create some of those 2014 F1 cars (and 2013 as well)
Thanks in advance for posting blueprints and useful views.
Keep an eye here: teamaoc.webs.com/formula1.htm
And I will post my creations on your forum
Let's see how much we can do!

.../...

Yes.

Let's go step by step, ok ? no hurry.
First help me answer a few questions, so I can share my work and let you join the work as well, ok?

20140317
What is the 'average' size of these 2013 and 2014 Formula 1 ?

After resizing blueprints of Ferrari, Marussia and Williams, here are the standard sizes I found:

width = 1800mm (see rules)
length = 5000mm (4958mm seen on a drawing of Marussia. 5248 seen on a drawing of a Renault with perspective. rounded to 5000mm.)
height = 1050mm (with or without video camera? without is 1041mm on a drawing of Ferrari, 1058 on a drawing of Mercedes )

So template is at: 5000x1800x1050mm, ok? Any questions? remarks? suggestions?

So ladies and gentlemen, start your Metasequoia.

And please specify what is your favorite scale? 1/12th? 1/30th? 1/24th? 1/43rd?
My favorite scale is 1/64th or 3inches or also 7.5cm.

Any blueprints (not photos with perspectives) are welcome!

.../...

20140318

I downloaded a model from the forum for measurement: a Force India 2013.
(I was surprised the name of the designer was not mentioned.)

The chassis is 5 cm wide. to compare with 140 cm in scale 1.
The diameter of the wheels is 2 cm. to compare with 62cm in scale 1.
The seat is 1.5 cm wide. can not compare with scale 1
The rear wing is 4.4 cm wide. to compare with 75 cm in scale 1.

So I conclude the scale is 1:30. Wow, that's big size.

If the total length in scale 1 is 500cm, then the 1:30 model is 16.6cm long.

Let's set up the size of the Metasequoia model at 1500x540x320 units.
It's a reasonable size on screen. The details are fine. And my computer can run it smoothly.

That's all for today. Please find the attached mqo file ready for download:
'mqo f1 2014 20140318'

This is a draft of a car mixing measurements from 2013 and 2014.

Ok, I see your favorite scale is 1:24th. No problem.

.../...

I will post my updates here but my files in another forum.
Follow the links. No need to register AFAIK:

www.maquettes-papier.net/forumenpapier/topic13185.html

[alexmetal007]

i can't see this file because i don't know how to see mqo files how can i see it

[igoraf]

Mar 19, 2014 17:39:35 GMT alexmetal007 said:

i can't see this file because i don't know how to see mqo files how can i see it

This is the native Metasequoia format. The author is using this software in his development. See at www.metaseq.net/en/index.html.

[keroliver]

...

[keroliver]

...

[papermodelfan]

I´M WAITING FOR THE RELEASE

[keroliver]

...

[raiko92i]

mon avis (en francais car en anglais je n'y arriverais pas : l'avant est top evite de trop y toucher mais le trouve l'arrière un peux trop carré

[keroliver]

Bien recu raiko92i

.../...

Read Me

Hi

Here is 'keroliver Marussia 2014'

The shape looks OK to me. I said OK.
I didn't say perfect or accurate.
The textures are basic, ok for 1/43 and 1/64 scales.
They might look bad and pixelised in 1/30 scale.
Welcome to improve them.

List of objects:
template texture = box
floor top
floor bottom
center
thingypit
induction
sidepods
wingsht & wingshb (h=horizontal,t=top/b=bottom)
wingsvo & wingsvi (v=vertical,i=in/o=out)
suspensions= susp-in & susp-out
wheels

List of textures:
floor top = top surface of the floor
floor bottom = bottom surface of the floor
center right = center right surface of the whole car
center left = center left surface of the whole car
center top = center top surface of the whole car
mar14 cpith = horizontal surfaces in thingypit
mar14 cpitv = vertical surfaces in thingypit
mar14 cpit wheel = wheel in thingypit
induction right = right surface of the induction box
induction left = left surface of the induction box
mar14 wingsh = horizontal surfaces on wings
mar14 wingsvL = vertical surfaces on wings Left side
mar14 wingsvR = vertical surfaces on wings Right side
wheel ARDR (in French) AR=Rear DR=Right
Wheel AVDR (in French) AV=Front DR=Right
Wheel ARGA (in French) AR=Rear GA=Left
Wheel AVGA (in French) AV=Front GA=Left
black + grey 1 + grey 2 = fixed colors

Go to teamaoc.webs.com for more models
Go to forumenpapier forum to download all files
>> www.maquettes-papier.net/forumenpapier/topic13185.html <<
Go to brawngpmodelling for news and updates
Go to racing paper models for news and updates

Regards - keroliver

[raiko92i]

grat first model =) .
ps: je trouve l'arrière un peux haut mais au 1/64 c'est parfait

[keroliver]

...

[keroliver]

Read Me

Hi

Here is 'keroliver Lotus 2014'



The shape looks quite good and accurate to me.
I didn't say perfect yet.
The textures are pretty good,
thanks to Christophe from VFR.
They are suitable for all scale from 1/30 to 1/64.

List of objects:
template texture = box
floor top
floor bottom
under floor = piece between the center and the floor
center
thingypit
induction1 & induction2
sidepods
wingsht1 & wingsht2 & wingshb (h=horizontal,t=top/b=bottom)
wingsvo & wingsvi (v=vertical,i=in/o=out)
suspensions= susp-in & susp-out
wheels level 1 = just a cylinder
wheels level 2 = cylinder + inner rims
rearviewmirror F (front) & R (rear)

List of textures:
floor bottom = bottom surface of the floor
center right = center right surface of the whole car
center left = center left surface of the whole car
center top = center top surface of the whole car
cpith = horizontal surfaces in thingypit
cpitv = vertical surfaces in thingypit
cpit wheel = wheel in thingypit
induction right = right surface of the induction box
induction left = left surface of the induction box
wingsh1 & 2 = horizontal surfaces on wings
wingsvL = vertical surfaces on wings Left side
wingsvR = vertical surfaces on wings Right side
wingsvI = vertical surfaces on the inside of wings
wheel ARDR (in French) AR=Rear DR=Right
Wheel AVDR (in French) AV=Front DR=Right
Wheel ARGA (in French) AR=Rear GA=Left
Wheel AVGA (in French) AV=Front GA=Left
black + grey 1 + grey 2 = fixed colors
test right = texture used during creation
texture box top = texture used during creation
rwm F = rear view mirror front texture
rwm R = rear view mirror rear texture


Go to teamaoc.webs.com for more models
Go to forumenpapier forum to download all files
>> www.maquettes-papier.net/forumenpapier/topic13185.html <<
Go to brawngpmodelling for news and updates
Go to racing paper models for news and updates

Regards - keroliver

[keroliver]

Read Me

Hi

Here is 'keroliver Force India 2014'



The shape looks quite good and accurate to me.
I didn't say perfect yet.
The textures are pretty good, thanks to Christophe from VFR.
They are suitable for all scale from 1/30 to 1/64.

List of objects:
template texture = box
floor top
floor bottom
under floor = piece between the center and the floor
center
thingypit
induction1 & induction2
sidepods
wingsht1 & wingsht2 & wingshb (h=horizontal,t=top/b=bottom)
wingsvo & wingsvi (v=vertical,i=in/o=out)
suspensions= susp-in & susp-out
wheels level 1 = just a cylinder
wheels level 2 = cylinder + inner rims
rearviewmirror F (front) & R (rear)

List of textures:
floor bottom = bottom surface of the floor
center right = center right surface of the whole car
center left = center left surface of the whole car
center top = center top surface of the whole car
cpith = horizontal surfaces in thingypit
cpitv = vertical surfaces in thingypit
cpit wheel = wheel in thingypit
induction right = right surface of the induction box
induction left = left surface of the induction box
wingsh1 & 2 = horizontal surfaces on wings
wingsvL = vertical surfaces on wings Left side
wingsvR = vertical surfaces on wings Right side
wingsvI = vertical surfaces on the inside of wings
wheel ARDR (in French) AR=Rear DR=Right
Wheel AVDR (in French) AV=Front DR=Right
Wheel ARGA (in French) AR=Rear GA=Left
Wheel AVGA (in French) AV=Front GA=Left
black + grey 1 + grey 2 = fixed colors
test right = texture used during creation
texture box top = texture used during creation
rwm F = rear view mirror front texture
rwm R = rear view mirror rear texture


Go to teamaoc.webs.com for more models
Go to forumenpapier forum to download all files
>> www.maquettes-papier.net/forumenpapier/topic13185.html <<
Go to brawngpmodelling for news and updates
Go to racing paper models for news and updates

Regards - keroliver

[keroliver]

Read Me

Hi

Here is 'keroliver Toro Rosso 2014'



The shape looks quite good and accurate to me. I didn't say perfect yet.
There are lots of simplifications compared to previous models.
This Toro Rosso is the perfect model for beginners to play with and modify.

The textures are pretty good, thanks to Christophe from VFR.
But the bull is from andyblackmore design. Thank you Andy for your work.
The textures are more suitable for 1/43 and 1/64, because limited to 1023 pixels.
They might be pixelixed in 1/30.

List of objects:
template texture = box
floor top
floor top1 = floor bottom
under floor = piece between the center and the floor
center = central piece
thingypit + cover
sidepods
wingsht1 + wingsht2 + wingsht3 = wings horizontal
wingshb h=horizontal b=bottom)
wingsvo & wingsvi (v=vertical,i=in/o=out)
suspensions= susp-in & susp-out
wheels level 1 = just a cylinder
wheels level 2 = cylinder + inner rims

List of textures:
floor bottom = bottom surface of the floor
center right = center right surface of the whole car
center left = center left surface of the whole car
center top = center top surface of the whole car
cpith = horizontal surfaces in thingypit
cpit wheel = wheel in thingypit
wingsh1 & 2 & 3 = horizontal surfaces on wings
wing ft L = vertical surfaces on wings Left side
wing ft R = vertical surfaces on wings Right side
wingsvI = vertical surfaces on the inside of wings
wheel ARDR (in French) AR=Rear DR=Right
Wheel AVDR (in French) AV=Front DR=Right
Wheel ARGA (in French) AR=Rear GA=Left
Wheel AVGA (in French) AV=Front GA=Left
black + grey 1 + grey 2 = fixed colors
Jante AV & Jantes AR = color of the rims
texture top = texture used during creation
front sidepods = texture used during creation
rwm F = rear view mirror front texture
toro rosso blue = R:2 G:2 B:26.5 in RealWorldPaint software
WvoL = Wings vertical Outside Left
WvoR = Wings vertical Outside right
WRB = Wings Rear Bottom

.../...

Go to teamaoc.webs.com for more models
Go to forumenpapier forum to download all files
>> www.maquettes-papier.net/forumenpapier/topic13185.html <<
>> Index du forum ‹ Le coin des concepteurs ‹ Projets et développements en cours < keroliver F1 2014
Go to brawngpmodelling for news and updates
Go to racing paper models for news and updates

Regards - keroliver

[papermodelfan]

very cool models, thanks keroliver!!!!!!!!!!!!